Welcome.

RBPMFG.NET CALL 714.630.7054


High Performance Delrin Bushings Made in USA Billet 33T Micro Stub "Super 99 Plus" Rear Brakes with Wilwood 4 piston calipers
Our Price: $1,550.00
Delrin bushing are made with a graphite impregnated material that is more durable than urethane and more forgiving than bronze metal bushings. It is a plastic compound that is harder than urethane yet softer than bronze or steel bushings. Delrin is the be Billet Micro Stub Plus Rear Disc Brake Kit. Micro Stub Rear Brakes are Engineered to increase Wheel Travel by relocating the Bearing Housing and CV joint Outward. Less CV Angle and longer Axles will allow more Wheel Travel With a Larger Bearing
Race quality delrin bushings
Made in USA Micro Stub "Super 99 Plus" rear 4 piston Disc Brake kits
1.25" Made in USA Weld in Threaded Bungs Made in USA 930 CV 28 Spline 300M Race Axles (sold in pairs)
Weld in threaded bungs are used when fabricating A-arms and link suspension. Bungs are measured on the outside diameter for the tubing size and inside threaded hole for a heim or bolt. Bungs are available with or without shoulder. Weld-In Bungs & Fittings Made in USA 300M race axles (sold in pairs). These race quality axles are made from the finest materials available. Choose your length and spline. Available in 934 spline. Click here for 934 axles.
Straight and shouldered bungs
Made in USA race axles
5/8 " Made in USA Stainless Steel High Misalignments Made in USA Billet 33T Micro Stub "Super 99" Rear Brakes with Wilwood 4 piston calipers
Our Price: $1,450.00
High angle misalignment stainless steel spacers are a necessary component when using heim joints and trying to achieve excessive amounts of travel. Misalignments are measured by the hole size in the heim joint or uniball, bolt size through the center of t Micro Stub Super Rear Disc Brake Kit. Micro Stub Rear Brakes are Engineered to increase Wheel Travel by relocating the Bearing Housing and CV joint Outward. Less CV Angle and longer Axles will allow more Wheel Travel With a Larger Bearin
High angle misalignment spacers Made in USA
Made in USA Micro Stub Rear 4 piston Disc Brake kits "Super 99MM"
Rack and Pinion Steering U-Joints 3/4" Made in USA Stainless Steel High Misalignments
Our Price: $29.00
Heavy duty U-joints are the best solution for Rack and Pinion and Steering Shaft geometry. Keyed, splined and Smooth joint openings allow the desired combination necessary for the build. High angle misalignment stainless steel spacers are a necessary component when using heim joints and trying to achieve excessive amounts of travel. Misalignments are measured by the hole size in the heim joint or uniball, bolt size through the center of t
Smooth, keyed and splined forged U joints
High angle misalignment spacers Made in USA
Made in USA Billet 2 Inch Hollow Spindle Front Brakes 3/4" Made in USA Weld in Threaded Bungs
Made in USA Billet Front Disc Brakes. Front Brake kits are available with 2 or 4 Piston Calipers for Combo or 2 Inch Hollow Spindles. This hub kit includes Calipers with Pads, Weld on Caliper Mounts Available, Wheel Bearings, Grease Seals, Billet Dust Cap Weld in threaded bungs are used when fabricating A-arms and link suspension. Bungs are measured on the outside diameter for the tubing size and inside threaded hole for a heim or bolt. Bungs are available with or without shoulder.Weld-In Bungs & Fittings,
Billet Combo and 2 inch Hollow Spindle Front Disc Brake kits
Straight and shouldered bungs
Made in USA Billet Combo Spindle Front Brakes Made in USA Billet 24T Micro Stub Rear Brakes with Wilwood 4 piston calipers
Made in USA Billet Front Disc Brakes. Front Brake kits are available with 2 or 4 Piston Calipers for Combo or 2 Inch Hollow Spindles. This hub kit includes Calipers with Pads, Weld on Caliper Mounts Available, Wheel Bearings, Grease Seals, Billet Dust Cap Made in USA Billet Micro Stub Rear Disc Brake Kit. Micro Stub Rear Brakes are Engineered to increase Wheel Travel by relocating the Bearing Housing and CV joint Outward. Less CV Angle and longer Axles will allow more Wheel Travel
Billet Combo and 2 inch Hollow Spindle Front Disc Brake kits
Made in USA Micro Stub Rear 4 piston Disc Brake kits
Made in USA 934 CV 33 Spline 300M Race Axles (sold in pairs) Made in USA Black Anodized End Load Rack and Pinions
934 CV spline made in USA 300M race axles (sold in pairs). These race quality axles are made from the finest materials available. Choose your length and spline. Also available in 930 spline. Click here for 930 axles. Made in USA  Rack and Pinions. Endload Racks are often used by chassis builders when the Tie Rod Spread exceeds 13 inches for an A-arm car. This rack is available with a 1.0 or 1.5 inch Heat Treated Chrome Moly Pinion Gear and Billet 6061 T-6
Made in USA race axles
End steer rack and pinions
Replacement off road 930 and 934 cv constant velocity joint axle boot and flange kits and components for VW Volkswagen baja bug, dune buggy and sand rail Replacement off road 930 and 934 cv constant velocity joint bates style axle boot and flange kits and components for VW Volkswagen baja bug, dune buggy and sand rail
Replacement off road 930 and 934 cv constant velocity joint axle boot and flange kits and components for VW Volkswagen baja bug, dune buggy and sand rail. The boot is attached around the inner lip of the flange. This is the most common style boot sold for Replacement off road 930 and 934 cv constant velocity joint bates style axle boot and flange kits and components for VW Volkswagen baja bug, dune buggy and sand rail. The boot is attached around the inner lip of the flange. This is the most common style b
Replacement off road 930 and 934 cv constant velocity joint axle boot and flange kits and components for VW Volkswagen baja bug, dune buggy and sand rail
Replacement off road 930 and 934 cv constant velocity joint bates style axle boot and flange kits and components for VW Volkswagen baja bug, dune buggy and sand rail
1.0 " Made in USA Stainless Steel High Misalignments Made in USA Black Anodized A-arm front Center Pivot Rack and Pinion
High angle Misalignment Stainless Steel Spacers are a necessary component when using Rod Ends and trying to achieve maximum amounts of travel. Misalignments are measured by the hole size in the Rod End or Uniball, bolt size and Height Made in USA Black Anodized Rack and Pinions. Front steering Center Pivot is ideal for A-arm cars. This Rack features a 1.0 or 1.5 inch Chrome Moly rack gear and 6061 T-6 Anodized  Aluminum housing. It is available with a 9.5 or 13.5 inch length Body
High angle misalignment spacers Made in USA
Front steer center pivot rack and pinion
Made in USA FK Rod Ends Made in USA Chrome Moly 2.0 Hollow Bolt on Spindles and Weld on Plates (1 ton Chevy Style)
Made in USA FK Rod Ends and Jam Nuts. Fk has a reputation for quality. When it come to your Suspension and safety, buy the best and know that you have built it right. We have seen cheap China copies break and destroy a car. Made in USA Chrome Moly  2 inch Hollow Bolt on Spindles and Plates (1 ton Chevy style). When Strength and Quality are your goal, building your Spindles with the best materials available are your number one concern.
Race quality heim joints
Chromoly 2 inch hollow bolt on spindles